Sea-doo GTX 4-TEC Operator's Manual page 82

TYPICAL
1. Hose adapter
2. Quick connect adapter (optional,
not mandatory)
3. Garden hose
Models with a Flushing
Connector in Engine
Compartment
This flushing connector allows flush-
ing while watercraft is on a lift or if
you prefer to flush from this location.
Either flushing connector can be used
to flush the exhaust cooling system.
The one at the jet pump support (see
above) or the one in the engine com-
partment (see below).
Remove seat to gain access.
______________________
80
1. Flushing connector
2. Dust cap
Remove dust cap from flushing con-
nector and attach coupler hose (sup-
plied in rear storage compartment).
Make sure coupler hose is properly
locked to flushing connector.
Install a hose pincher (supplied inside
tool kit in rear storage compartment)
on water outlet hose.
NOTE: This prevents water from di-
rectly exiting exhaust cooling system.
1. Coupler hose
2. Hose pincher