Fuel Gauge/Low Oil Warning Light (If So Equipped); Speedometer (If So Equipped); Tachometer (If So Equipped); Information Center Gauge/Buttons (If So Equipped) - Sea-doo 2001 GS Operator's Manual

GTX RFI Models
From the forward position, pull the le-
ver to neutral or reverse as desired.
Push back to go to previous position.
Always set in forward when finished.
All Models
9) Fuel Gauge/Low Oil
Warning Light
(if so equipped)
Analog gauge indicates the amount of
fuel in the fuel tank and a warning light
turns on when level is low in oil reser-
voir.
0
F01G07Y
1. Low oil warning light
NOTE: With the safety lanyard discon-
nected, electrical system can be acti-
vated for approximately 33 seconds by
depressing the engine start/stop but-
ton. This is convenient to see the fuel
level (also low oil level condition) when
the safety lanyard is not at hand.
10) Speedometer
(if so equipped)
Analog speedometer indicates the
speed of watercraft in miles per hour
(MPH) and kilometers per hour (km/h).
The speed sensor mounted on the ride
plate sends the signal to the speedom-
eter and information center (if so
equipped).
36
1
1
www.SeaDooManuals.net
11) Tachometer
(if so equipped)
An analog tachometer indicates the
revolutions per minute (RPM) of the
engine. Multiply by 1000 to obtain the
actual revolutions.
12) Information Center
Gauge/Buttons
(if so equipped)
NOTE: With the safety lanyard discon-
nected, information center can be ac-
tivated for approximately 33 seconds
by depressing the engine start/stop
button. This is convenient to see the
fuel level or view some other func-
tions when the safety lanyard is not at
hand.
This is a LCD multifunction gauge. Dif-
ferent displays and functions can be
activated using 2 buttons — MODE
and SET — following specific sequenc-
es as described below.
1
F00L2BY
1. To change display mode
2. To set or reset a function
Resetting a Function
To reset a function (such as the chro-
nometer, peak speed, distance, etc.)
press and hold the SET button for 2
seconds while in the appropriate mode.
The information center includes the fol-
lowing display areas.
2