Speedometer (If So Equipped); Information Center Gauge/Buttons (If So Equipped) - Sea-doo GTI Series Operator's Manual

8) Speedometer (if so
equipped)
Analog speedometer indicates the
speed of watercraft in miles per hour
(MPH) and kilometers per hour (km/h).
The speed sensor mounted on the
ride plate sends the signal to the
speedometer and information center
(if so equipped).
9) Information Center
Gauge/Buttons (if so
equipped)
This is a LCD multifunction gauge.
Different displays and functions can
be activated using 2 buttons — MODE
and SET — following specific se-
quences as described below.
1. To change display mode
2. To set or reset a function
Resetting a Function
To reset a function (such as the
chronometer, distance, etc.) press
and hold the SET button for 2 seconds
while in the appropriate mode.
The information center includes the
following display areas.
______________________
34
1. General display
2. Message/units display
3. Warning light
4. Fuel level display
General Display
Repeatedly pressing the MODE but-
ton scrolls the following displays:
Compass (if so equipped), Tachome-
ter, speedometer, average speed, trip
meter, hourmeter, water temperature,
exterior temperature (if so equipped)
and chronometer.
1. Press to change display mode
When you are satisfied with your
choice, stop pressing the button.The
display you have chosen will remain
until it is changed. When safety lan-
yard is installed, the last chosen dis-
play will come back.
Compass (if so equipped): Displays
the cardinal points to indicate the ori-
entation of the watercraft.
www.SeaDooManuals.net