Information Center (Gauge) (Gts); Multifunction Gauge Description - Sea-doo GTS Operator's Manual

INFORMATION CENTER (GAUGE) (GTS)

Do not adjust the display while riding, you could lose control.
smo2011-003-024_a
TYPICAL - GTS MODELS
1. Multifunction gauge
Multifunction Gauge
Description
8
2
1
3
7
smo2011-003-021_b
1) Multifunction Display
The multifunction display is used to:
– Display the WELCOME message
on power up
– Display the KEY recognition mes-
sage
9 9 10
4
11
5
6
WARNING
1
– Display the engine RPM
– Display fault messages.
NOTE: If a fault occurs, it will period-
ically scroll the applicable fault mes-
sage in the display and revert to the
RPM indication depending on the
severity of the fault detected.
2) Numerical Display
The numerical display provides an indi-
cation of estimated watercraft speed.
3) Touring Mode Indicator
When the TOURING mode indicator is
ON, the default TOURING mode is ac-
tive.
Refer to
tion for details.
_______________
OPERATING MODES
subsec-
51