Information Center Gauge/Buttons (If So Equipped) - Sea-doo GTI 2003 Operator's Manual

11) Information Center
Gauge/Buttons
(if so equipped)
This is a LCD multifunction gauge. Dif-
ferent displays and functions can be
activated using 2 buttons — MODE
and SET — following specific sequenc-
es as described below.
1
F00L2BY
1. To change display mode
2. To set or reset a function
NOTE: Some models have the MODE
and SET buttons at a different location
and differ in appearance. However, the
functionality is the same. The following
explanations apply to both types of but-
tons.
1
F18L09Z
1. To change display mode
2. To set or reset a function
Resetting a Function
To reset a function (such as the chro-
nometer, distance, etc.) press and hold
the SET button for 2 seconds while in
the appropriate mode.
The information center includes the fol-
lowing display areas.
38
2
2
2 1
3
F00L2CY
1. General display
2. Message/units display
3. Warning light
4. Fuel level display
5. VTS position indicator (if so equipped)
General Display
Repeatedly pressing the MODE button
scrolls the following displays: Com-
pass (if so equipped), Tachometer,
speedometer, average speed, trip
meter, hourmeter, water temperature,
exterior temperature (if so equipped)
and chronometer.
1
F00L2BZ
1. Press to change display mode
When you are satisfied with your choice,
stop pressing the button.The display
you have chosen will remain until it is
changed. When safety lanyard is in-
stalled, the last chosen display will come
back.
5
4