Information Center (Gauge) - Sea-doo 2011 RXP-X Operator's Manual

smo2008-001-012_a
TYPICAL
1. Shift lever
2. Forward position
3. Neutral position
4. Reverse position
7) Information Center
(Gauge)
The information center is a multifunc-
tion gauge that supplies several real
time useful information to the driver
either in English, French or Spanish.
Metric or imperial units of measure-
ment are also available.
See an authorized Sea-Doo dealer to
have the information center set to the
language and units of measurement of
your choice.
At start-up, all LCD segments and indi-
cator lights will turn on for 3 seconds
each time the information center is
activated (when the tether cord is in-
stalled). This allows the driver to vali-
date they are all working properly.
WARNING
Reading the gauge digital display
can distract from the operation of
the watercraft, particularly from
constantly scanning the environ-
ment. Always ensure your envi-
ronment is clear and free from ob-
stacles or persons in the water,
and bring the watercraft to a low
speed before proceeding with any
change in the display setting.
CONTROLS/INSTRUMENTS/EQUIPMENTS
smo2007-002-009_a
GTS PRO MODEL
1. Speedometer (if so equipped)
2. Tachometer
3. Fuel level
4. Information display
5. Indicator lights
smo2007-002-010_a
RXP-X 255 MODEL
1. Speedometer
2. Tachometer
3. Fuel level
4. Information display
5. Indicator lights
6. Water depth display (if so equipped)
7. Water temperature display
8. VTS position indicator (if so equipped)
Speedometer
Speedometer indicates the speed of
watercraft in miles per hour (MPH) or
kilometers per hour (km/h).
Tachometer
Tachometer indicates the revolutions
per minute (RPM) of the engine. Mul-
tiply by 1000 to obtain the actual revo-
lutions.
Fuel Level
A bar gauge continuously indicates the
amount of fuel in the fuel tank while rid-
ing.
_______________
41