Controls; Handlebar; Throttle Lever - Sea-doo GTXPRO 130 Series Operator's Manual

CONTROLS

Some vehicle safety labels are not shown on illustrations. For information on vehi-
cle safety labels, refer to
219001970-003_a
TYPICAL
NOTE: Some indications, functions and features described in this section may not
apply to every PWC model, or may be available as an option.

1) Handlebar

The handlebar controls the direction of
the watercraft. During forward opera-
tion, turning the handlebar to the right
steers the watercraft to the right and
inversely.
WARNING
Check handlebar and correspond-
ing steering nozzle operation be-
fore starting. Never turn handle-
bar while someone is near the rear
of the watercraft. Keep away from
propulsion system.
When operating in reverse, steering
direction is reversed. Turning the han-
dlebar to the right while backing up
steers the watercraft to the left.

2) Throttle Lever

The throttle lever on the RH handle-
bar controls electronically the engine
speed.
______________
43
WATERCRAFT SAFETY LABELS
.
To increase or maintain watercraft
speed, pull the throttle lever with your
finger.
To decrease watercraft speed, release
the throttle lever.
219001878-011_a
1. Throttle lever
2. To accelerate
3. To decelerate
The throttle lever is spring loaded and
should return to rest position (idle)
when not pressed.