Handlebar; Throttle Lever; Engine Start/Stop Button - Sea-doo GTI Operator's Manual

Limited-Speed Operation
The SEA-DOO Learning Key
programmed in two different configu-
rations to limit the speed of the wa-
tercraft, therefore enabling first time
users and less experienced operators
to learn how to operate the water-
craft while gaining the necessary con-
fidence and control.
See an authorized Sea-Doo dealer to
have your SEA-DOO Learning Key
programmed accordingly.

2) Handlebar

The handlebar controls the direction of
the watercraft. Turning the handlebar
to the right steers the watercraft to the
right and inversely.
WARNING
Check handlebar and correspond-
ing steering nozzle and side vanes
operation before starting. Never
turn handlebar while someone is
nearby rear of watercraft. Keep
away from steering moving parts
(nozzle, side vanes, linkage etc.).
Adjustment (if so equipped)
The handlebar height can be adjusted
to suit rider preferences.
To perform this adjustment, turn the
knob underneath the handlebar.
______________________
40
TM can be
TM
TYPICAL
1. Adjustment knob

3) Throttle Lever

When the throttle lever is pushed, the
watercraft accelerates. When fully
released, engine automatically slows
down to idle speed and watercraft is
gradually stopped by water drag.
4) Engine Start/Stop
To start engine, depress and hold the
start/stop button. Release immedi-
ately after engine is started.
To stop engine, depress the start/stop
button. When stopped, disconnect
the DESS key from its post. It is sug-
gested to release throttle lever first.
Directional
when the throttle is released or
when engine is off.
Button
WARNING
control is reduced