Power Over Ethernet - Yealink SIP-T29G User Manual

User Guide for the SIP-T29G IP Phone
AC Power (Optional)
To connect the AC power:
1. Connect the DC plug on the power adapter to the DC5V port on the phone and
connect the other end of the power adapter into an electrical power outlet.
2. Connect the included or a standard Ethernet cable between the Internet port on the
phone and the one on the wall or switch/hub device port.
The IP phone should be used with Yealink original power adapter (5V/2A) only. The use of
Note
the third-party power adapter may cause the damage to the phone.

Power over Ethernet

With the included or a regular Ethernet cable, the SIP-T29G IP phone can be powered
from a PoE-compliant switch or hub.
18