Yealink SIP-T29G User Manual page 136

User Guide for the SIP-T29G IP Phone
3) (Optional.) Enter the busy forward on code or off code respectively in the
On Code or Off Code field.
You can also enable busy forward for all accounts. After busy forward was
enabled for a specific account, do the following:
1) Press
2) Press the All Lines soft key.
The LCD screen prompts ―Copy to all lines?‖.
3) Press the OK soft key to accept the change or the Cancel soft key to
cancel.
c) If you select No Answer Forward, you can enable it for a specific account.
1) Press
Answer Forward field.
2) Enter the destination number you want to forward unanswered incoming
calls to in the Forward to field.
3) Press
before forwarding from the After Ring Time field.
The default ring time is 12 seconds.
124
or to highlight the Busy Forward field.
or , or the Switch soft key to select Enabled from the No
or , or the Switch soft key to select the ring time to wait