Yealink SIP-T29G User Manual page 141

then press
advance. Refer to
Press the Directory soft key, and then select Remote Phone Book. Select the
-
desired group and search for the contact (Directory should be configured in
advance. Refer to
for more information).
3. Press or
4. After the party answers the call, press
transfer.
If you are using a handset, the transfer can be completed by hanging up the handset.
You can cancel the transfer before the call is connected by pressing the Cancel soft key.
You can enable or disable call waiting on the phone. If call waiting is enabled, you can
receive another call while there is already an active call on the phone. Otherwise,
another incoming call is automatically rejected by the phone with a busy message
when there is an active call on the phone. You can also enable or disable the phone to
play a warning tone when receiving another call.
To configure call waiting via phone user interface:
1. Press Menu->Features->Call Waiting.
2. Press or , or the Switch soft key to select Enabled from the Call Waiting
field.
3. Press or , or the Switch soft key to select Enabled from the Play Tone field.
4. (Optional.) Enter the call waiting on code or off code respectively in the On Code or
Off Code field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Call waiting is configurable via web user interface at the path Features->General
Information.
or to select the entry (Directory should be configured in
Directory on page
Directory on page
to dial out.
49 for more information).
49 and Remote Phone Book
or the Transfer soft key to complete the
Basic Call Features
on page 65
129