Yealink SIP-T29G User Manual page 153

To pick up a call in the group:
1. Pick up the handset, press the Speakerphone key or press the line key.
The GPickup soft key appears on the LCD screen.
2. Press the GPickup soft key on your phone when a phone in the group receives an
incoming call.
The call is answered on your phone.
You can also configure a DSS key as group pickup key via phone user interface or web
user interface. Once configured, you can pick up a call by pressing the group pickup
key directly.
Note
The directed call pickup code and group call pickup code are predefined on the system
server. Contact your system administrator for more information.
The call pickup code configured on a per-line basis takes precedence over that
configured on a global basis.
You can use anonymous call to block your identify and phone number from appearing
to the called party when you call someone. For example, you want to call to consult
some of the services, but don't want to be harassed. Anonymous call is configurable on
a per-line basis. You can also configure the phone to send anonymous code to the
server to activate/deactivate anonymous call on the server side.
Note
Anonymous call is not available on all servers. Contact your system administrator for the
anonymous call on code and off code.
To configure anonymous call via phone user interface:
1. Press Menu->Features->Anonymous.
2. Select the desired line and then press the Enter soft key.
3. Press
Anonymous field.
or , or the Switch soft key to select Enabled from the Local
Basic Call Features
141