Yealink SIP-T29G User Manual page 134

User Guide for the SIP-T29G IP Phone
4) (Optional.) Enter the no answer forward on code or off code respectively
in the On Code or Off Code field.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
The icon on the status bar indicates that the call forward is enabled.
To enable call forward in custom mode:
1. Press Menu->Features->Call Forward.
2. Press
3. Press
soft key.
4. Depending on your selection:
a) If you select Always Forward, you can enable it for a specific account.
1) Press
Forward field.
2) Enter the destination number you want to forward all incoming calls to in
the Forward to field.
122
or to select the desired account, and then press the Enter soft key.
or to select the desired forwarding type, and then press the Enter
or , or the Switch soft key to select Enabled from the Always