Yealink SIP-T29G User Manual page 163

You place a new call

To record a call:
1. Press the Record or URL Record key during a call.
If the recording starts successfully, the recording icon will appear on the LCD screen
and the Record or URL Record key LED will flash green.
2. Press the Record or URL Record key again to stop recording.
The recording icon disappears from the LCD screen and the Record or URL Record
key LED goes out.
Recording status indicators you need to know:
Circumstance
A recording is started
A recording cannot be started
A recording cannot be stopped
The recording box is full
The call cannot be recorded
You can listen to the recordings stored on your server system. For example, you can dial
an access code to listen to the recordings.
Note
The way in which you listen to the recordings may be different depending on the server.
Contact your system administrator for more information.
Hot desking originates from the definition of being the temporary physical occupant of
a work station or surface by a particular employee. A primary motivation for hot
desking is cost reduction. This feature is regularly used in places where not all the
employees are in the office at the same time, or not in the office for very long, which
means that actual personal offices would be often vacant, consuming valuable space
and resources.
You can use hot desking on the SIP-T29G IP phone to log out of existing accounts and
then log into a new account. As a result, many users can share the phone resource at
different times. To use this feature, you need to configure a hot desking key in advance.
Note Hot desking is not available on all servers. Contact your system administrator for more
information.
Advanced Phone Features
Icons on the LCD screen
appears on the LCD screen
appears for 1 second
appears for 1 second, then goes back
appears for 1 second
appears for 1 second
151