Yealink SIP-T29G User Manual page 54

User Guide for the SIP-T29G IP Phone
2. Press
or select Disabled to disable this feature.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
Key as send is configurable via web user interface at the path Features->General
Information.
You can lock your phone temporarily when you are not using it. This feature helps to
protect your phone from unauthorized use.
Phone lock consists of the following:
Menu Key:
Function Keys:
All Keys:
Note The emergency number setting, if desired, must be made before lock activation. For
more information, refer to
To activate the phone lock via phone user interface:
1. Press Menu->Advanced (default password: admin) ->Phone Lock.
2. Press
field.
42
or , or the Switch soft key to select # or * from the Key as Send field,
The Menu soft key is locked. You cannot access the menu of the
phone until unlocked.
The function keys are locked. You cannot use the MESSAGE, RD,
HOLD, MUTE, TRAN, CONF , OK, X, navigation keys, soft keys
and line keys until unlocked.
All keys are locked except the Volume key, digit keys, # key, *
key and Speakerphone key. You are only allowed to dial
emergency numbers, reject incoming calls by pressing the X
key or Reject soft key, answer incoming calls by lifting the
handset, pressing the Speakerphone key, the HEADSET key, the
OK key or Answer soft key, and end the call by hanging up the
handset, pressing the Speakerphone key, EndCall soft key or X
key.
Emergency Number
or , or the Switch soft key to select Enabled from the Lock Enable
on page 98.