Yealink SIP-T29G User Manual page 147

If the call park code is configured, the phone will dial the configured call park
-
code shown as below:
2. Do one of the following:
a) If you want to park the call against the local extension.
1) Press
1. If the call is parked successfully, you will hear a voice prompt confirming
that the call is parked.
b) If you want to park the call against desired extension.
1) Enter an extension where you want to park the call.
2) Press
2. If the call is parked successfully, you will hear a voice prompt confirming
that the call is parked. The call is parked against the extension you
entered.
To retrieve a parked call in FAC mode:
1. Do one of the following:
If the park retrieve code is not configured, dial the park retrieve code (e.g.,
-
*88).
If the park retrieve code is configured, press the Retrieve soft key on the
-
dialing screen or retrieve park key (if configured) on the IP phone.
The phone will dial the configured park retrieve code and the Retrieve screen
appears as below:
.
or .
Basic Call Features
135