Yealink SIP-T29G User Manual page 132

User Guide for the SIP-T29G IP Phone
You can enable/disable call forward for the phone system, or you can customize call
forward for each or all accounts. Two call forward modes:
Phone (default): Call forward is effective for the phone system.

Custom: Call forward can be configured for each or all accounts.

To configure the call forward mode via web user interface:
1. Click on Features->Forward & DND.
2. In the Forward block, mark the desired radio box in the Mode field.
3. Click Confirm to accept the change.
Note
Call forward mode is configurable via web user interface only.
To enable call forward in phone mode:
1. Press Menu->Features->Call Forward.
2. Press
soft key.
3. Depending on your selection:
a) If you select Always Forward:
1) Press
Forward field.
2) Enter the destination number you want to forward all incoming calls to in
the Forward to field.
3) (Optional.) Enter the always forward on code or off code respectively in
120
or to select the desired forwarding type, and then press the Enter
or , or the Switch soft key to select Enabled from the Always