Yealink SIP-T29G User Manual page 148

User Guide for the SIP-T29G IP Phone
2. Follow the voice prompt, do one of the following:
Press
-
Enter the desired extension follow by # (e.g., 4603#) on any phone.
-
To configure call park feature in transfer mode via web user interface:
1. Click on Features->Call Pickup.
2. Select Transfer from the pull-down list of Call Park Mode.
3. Select Enabled from the pull-down list of Call Park.
If Enabled is selected, the Park soft key will display on the LCD screen during a call,
and the Retrieve soft key will display on the dialing screen.
4. (Optional.) Enter the call park number in the Call Park Code field.
It is configured for the Park soft key. This call park number will also apply to the call
park key. For more information, refer to
5. (Optional.) Enter the park retrieval number in the Park Retrieve Code field.
It is configured for the Retrieve soft key. This park retrieval number will also apply to
the retrieve park key. For more information, refer to
6. Click Confirm to accept the change.
Note
If the Park or Retrieve soft key doesn't appear on the LCD screen, please select
Disabled from the pull-down list of Custom Softkey via web user interface at path
Settings->Softkey Layout.
To park a call in Transfer mode:
1. During a call, press the Park soft key (You may need to press the More soft key to
see the Park soft key) or the call park key (If configured).
136
on the phone where the call is parked.
DSS Keys on page 77.
DSS Keys on page 77.