Yealink SIP-T29G User Manual page 72

User Guide for the SIP-T29G IP Phone
To search for a contact in the local directory:
1. Press the Directory soft key.
The IP phone enters the local directory directly as there is only Local Directory
enabled in the directory by default.
If Local Directory is removed from the directory
press Menu->Directory->Local Directory to enter the local directory.
2. Press the Search soft key.
3. Enter a few continuous characters of the contact name or continuous numbers of the
contact number (office, mobile or other number) using the keypad.
The contacts whose name or phone number matches the characters entered will
appear on the LCD screen. You can dial from the result list.
You can search for a contact from the desired lists when the phone is on the dialing
screen. The lists can be Local Directory, History, Remote Phone Book and LDAP .
To configure search source list in dialing via web user interface:
1. Click on Directory->Setting.
2. In the Search Source List In Dialing block, select the desired list from the Disabled
column and click
60
.
refer to Directory on page
(
49 ,
)