Yealink SIP-T29G User Manual page 144

User Guide for the SIP-T29G IP Phone
4. Enter the conference URI (e.g., conference@example.com) in the Conference URI
field.
5. Click Confirm to accept the change.
Note
Network conference is configurable via web user interface only.
To set up a network conference call:
1. Place a call to the first party.
2. Press
The active call is placed on hold.
3. Enter the number of the second party and then press
key.
4. When the second party answers the call, press
add the second party to the conference.
5. Press
The conference is placed on hold.
6. Enter the number of the new party and then press
7. When the new party answers the call, press
the new party to the conference.
8. Repeat steps 5 to 7 until you have added all intended parties.
The procedures to set up a network conference call on specific servers may be different
from introduced above. Contact your system administrator for more information.
132
or the Conference soft key to place a new call.
or the Conference soft key to place a new call.
, , or the Send soft
or the Conference soft key to
, , or the Send soft key.
or the Conference soft key to add