Yealink SIP-T29G User Manual page 118

User Guide for the SIP-T29G IP Phone
When you are not in another call, you can answer a call in one of three ways:
Using the handset

Using the speakerphone

Using the headset

You can reject incoming calls by pressing the X key or the Reject soft key. You can also
Note
activate Do Not Disturb mode to ignore the incoming calls without ringing on your phone.
For more information, refer to
You can forward incoming calls to someone else by pressing the FWD soft key. For more
information, refer to
Answering When Not in Another Call
Call duration and destination will always appear on the LCD screen for the active call.
To answer a call using the handset:
1. Pick up the handset.
To answer a call using the hands-free speakerphone mode:
Do one of the following:
- Press
With the handset on-hook and the headset mode deactivated, press the Answer
-
soft key.
- With the handset on-hook and the headset mode deactivated, press the line key
with the fast flashing green LED indicator.
To answer a call using the headset:
Do one of the following:
Press
-
With the headset mode activated, press the Answer soft key.
-
- With the headset mode activated, press the line key with the fast flashing green LED
indicator.
Answering When in Another Call
If you have an active call, and an incoming call arrives on the phone, do one of the
following:
Press the Answer soft key.
-
The incoming call is answered and the original call is placed on hold.
106
Do Not Disturb (DND)
Call Forward on page 119.
.
.
on page 115.