Yealink SIP-T29G User Manual page 43

The screen saver will automatically start each time your phone is idle for a certain
amount of time. The screen saver is used to blank the screen or fill it with moving images
or patterns. You can stop the screen saver at any time and return to the idle screen by
pressing a key on the phone. If your phone is idle again for a specified period of time,
the screen saver will start again.
You can configure the screen saver of SIP-T29G IP phone, and upload custom pictures to
set up a screen saver of your picture via web user interface. You can only configure the
screen saver wait time via phone user interface.
The SIP-T29G IP phone supports the file format of custom pictures in the following table:
Format
*.jpg/*.png/*.bmp
To upload a custom picture via web user interface:
1. Click on Settings->Preference.
2. Select Upload Picture from the pull-down list of Screensaver Type.
3. In the Upload Screensaver field, click Browse to locate the custom picture from
your local system.
4. Click Upload to upload the file.
The Upload Screensaver field appears only if Screensaver Type is set to Upload
Picture.
Resolution Picture Size
480*272
Customizing Your Phone
≤5MB
31