Button; Set-Up Button (Configuring The Instrument) - AEMC 1050 User Manual

2.5.6

Button

Changes the flashing parameters displayed, or views R(t) values (see § 2.5.3).
As a general rule, two figures (day, month, hour, min., sec., and OBJ:TEST)
flash.
The  and  functions have a "follow-on" mode. (e.g. as soon as the high or low
program limit is reached, the parameter to be modified switches automatically to
the following low or high limit.)
First Function 
• Press button briefly to increase the displayed number slowly
• Press button for a longer time to increase at a faster rate
Second Function 
• Press button briefly to decrease the displayed number slowly
• Press button for a longer time to decrease at a faster rate
Unlike all the second functions of other buttons, it is not necessary to press the
button each time to get to the  function. The
and is valid for the  function (only), as long as the user does not deactivate it by
pressing or another button.
2.5.7

SET-UP Button (Configuring the Instrument)

After selecting SET-UP with the rotary selector switch:
• All the display segments are lit up for 1 second
• The software version number is displayed
• The instrument serial number is displayed
• "PUSH" comes up on the small display and "btn" on the main display,
inviting the operator to press a button
The SET-UP function is used to directly access the parameters to be pro-
grammed, by pressing the corresponding button:
• After having pressed a button, the corresponding figures or symbols
appear on the screen
• The figures or the symbols that can be modified flash on the screen
• Use the
• All the parameters are immediately and permanently saved
Shop for AEMC products online at:
18
and buttons
ShopAEMC
www.
symbol remains displayed
.com 1.877.766.5412
Megohmmeter Models 1050 /1060