• To activate/deactivate this function, simply select ON or OFF on the small
display with the button.
• The value will be stored and displayed on the main display, but can be
activated or deactivated, depending on what the small display indicates.
• Values between 0Ω and 5Ω can be saved for lead compensation. Beyond
this value, nothing is saved.
2.5.11 Default Device Configuration
In SET-UP, press the
• "SEt" appears in the small display
• "DFLt" appears in the main display
Press START to select the default configuration settings (see the previous table).
2.5.12 Blocking (Disabling) Test Voltages
This function prevents insulation measurements from being carried out at selected
test voltages. This makes it possible to use the instrument for specific applications
and avoid improper voltages.
In SET-UP, press the
disabled):
• The test voltages appear in order on the small display with the
and ON/OFF on the main display.
• Choose ON or OFF using the
disable (OFF) or to reinstate (ON) for use during insulation tests at these
voltages.
Shop for AEMC products online at:
Megohmmeter Models 1050 /1060
button four times:
button 5 times or more (depending on the voltage to be
ShopAEMC
www.
button for each test voltage you wish to
.com
symbol
1.877.766.5412
21