GeoVision GV-VS04H User Manual page 69

Wiegand Function
Note this function is only available for GV-VS04H and GV-VS14.
The GV-Video Server can work in conjunction with the Wiegand-interface car
send video and cardholder data to the central monitoring stations Center V2
Monitor, as well as GV-System (GV-DVR / N
Video Server can be used as an input to activate recording once the card reader is
triggered or a valid card is present to the card reader.
The output format of Wiegand supported by the GV-Video Server is HID standard 26 bits
and 37 bits.
Wiegand In
Card Reader
Transfer Card Number to Center V2, Vital Sign Monitor and GV-Syst
/ NVR): Sends the cardholder da
(GV-DVR / NVR) once the card reader is triggered.
Send video to Center V2 and GV-System (GV-DVR / NVR) when th
device is triggered: The selected camera(s) will start recording into the GV-Video
Server and the related video will also be sent to Center V2 and GV-System (GV-DVR /
NVR) once the card reader is triggered.
Note: To receive cardholder data from the GV-Video Server, the GV-System(GV-DVR /
NVR ) must be version 8.2 or later.
VR). Moreover, the Wiegand port on the GV-
GV-Video Server
Recording
USB Mass Storage Device
Figure 4-17
ta to Center V2, Vital Sign Monitor and GV-System
Administrator Mode
4
/
TCP IP
Text Data
GV-Vital Sign Monitor
Video Data
Text Data
GV-Center V2
Video Data
Text Data
GV-Syste
(GV-DVR
d reader to
and Vital Sign
m
/ NVR)
em (GV-DVR
e Wiegand
61