Backup Center - GeoVision GV-VS04H User Manual
Hide thumbs
Also See for GV-VS04H:
- User manual (185 pages) ,
- Quick start manual (13 pages) ,
- How-to manual (15 pages)
Table of Contents
Advertisement
Administrator Mode
4
4.3.6 Backup Center
Note the function is only available for GV-VS04H (Firmware Version 1.03
or later), GV-
VS11, GV-VS12 (Firmware Version 1.02 or later) GV-VS14 and GV-VS2420 / 2400.
The connection to GV-Backup Center allows you to back up another copy of
recordings
and system log to a PC-based GV-Backup Center while t
he GV-Video Server is saving
these data to the attached storage device. If a disaster strikes where the GV-Video Server
is located, the recording data remain safe in a different location.
Figure 4-24
To enable the GV-Backup Center connection:
1. Activate Link: Enable the connection to GV-Backup Center.
2. Host Name or IP Address: Type the host name or IP address of GV-Backup Center.
73
Advertisement
Table of Contents
