GeoVision GV-VS04H User Manual page 109

[Disk Information]
This section shows the details of the attached storage devices.
[Partition Information]
This section shows the partition
To add a USB mass storage device:
1. Attach the device to the GV-Video Server.
2. Click the Format button.
After the format is complete, the pa
To remove a USB mass storage device:
1. Click the Remove button.
2. When you are prompted to ensure the action, click Yes. The page will be refreshed
and t he partition information will be cleaned.
3. Remove the device from the GV-Video Server.
Note:
1. If Enab le Recycle is selected, the available space of the USB mass storage device
must be higher than the space you specified at the Stop recording o
when free space of disk is smaller
recoded.
2. The recording data may be lost if you remove the USB mass storag
recording.
3. The storage device will be divided into three partitions after being formatted. Each
partition has a maximum capacity of 200 GB.
4. If you do not remove the USB storage device properly, the data cannot be read in
another computer. In this case, re-plug the storage device back to the GV-Video
Server. The system will repair the data automatically. When the system is repairing
the data, the Remove field will display "Repairing".
details of the attached storage devices.
rtition information will display.
than x option. Otherwise no video will be
Administrator Mode
4
r recycle disk
e device during
101