GeoVision GV-VS04H User Manual page 56

1. The default sensitivity value for the whole area is 2 for GV-VS04H and
/ 14, and the value is 9 for GV-VS2420 / 2400. To define a different sensitivity value,
click Reset.
2. Select the desired sensitivity by moving t
value, the more sensitive the camera is to motion.
3. Drag an area on the image. Click Add when you are prompted to
4. To create several areas with different sensitivity values, repeat Steps 2 and 3.
5. Click Save to save the above settings.
6. To trigger the alarm outputs when motion is detected, s
Output 4). To activate the output settings, you must also start Camera
manually or by schedule. For related settings, see 4.4 Monitoring.
7. Note this function is not supported by GV-VS2420 / 2400. To send mo
notifications to Center V2 and
enable the schedule mode and click Apply.
A. Set each time frame during the day. Each day can be divided into 3
represented by Span 1 to Span
B. Enable the Weekend option to have a whole-day monitoring on the
Define whether your weekend includes
C. Click Apply to save the above settings.
Note: For GV-VS11 and GV-VS12 users, this function does not wo
codec is selected in the Video Signal Type field (Figure 4-1). For detai
Video Settings.
8. If you want to ignore environmental changes such as rain or snow, select Ignore
environmental changes. Note this function is only available for GV-VS2420 / 2400.
9. The Noise Tolerance function is enabled by default. It ignores video noise when the
light intensity changes. Note this function is only available for GV-VS2420 / 2400.
48
he slider to set the value. The higher the
Vital Sign Monitor during a particular time period,
3.
Saturday and Sunday
Figure 4-4-1
GV-VS11 / 12
confirm the setting.
elect the outputs (Output 1 to
monitoring
tion detection
time frames,
weekend.
or
Only Sunday.
rk when MJPEG
ls, see 4.1.2