GeoVision GV-VS04H User Manual page 22

1.7.2.3 GV-VS11
No. Name
1 USB Port
2 Ethernet Port
3 Terminal Block
4 Power In
1.7.2.4 GV-VS12
No. Name
1 Power In
2 Ethernet Port
3 USB Port
4 I/O / PTZ Port
RS-232
5
Terminal Block
6 Default Button
7 Ready LED
8 Power LED
14
1 1
1 2
Figure 1-6
Function
1 USB port for installing portable storage device.
A plug for inserting an Ethernet cable to build the network
connection.
The connectors for digital input, digital output and PTZ camera
control. See Chapter 9 Auxiliary Device Connectors.
A plug for power input.
1 2 3
Figure 1-7
Function
A plug for power input.
A plug for a 10/100 Ethernet or PoE.
1 USB port for installing the portable storage device.
A port for digital input, relay output and PTZ camera control. Insert
the I/O Cable with RJ-45 Connector to this port. See Chapter 9
Auxiliary Device Connectors.
The connectors for GPS module control. See Chapter 9 Auxiliary
Device Connectors.
It resets all configurations to their factory settings. See 6.4
Restoring to Factory Default Settings.
This LED is on, indicating the GV-Video Server is ready for
connection.
This LED is on, indicating the power is supplied.
3 1
3 4
8
7
4 5 6