GeoVision GV-VS04H User Manual page 72

[Enable] Select to enable the e-mail function.
Sever URL/IP Address: Type the SMTP Server's URL address or IP address.
Server Port: Type the SMTP Server's port num
From email address: Type the sender's e-mail address.
Send to: Type the e-mail address(s) you want to send alerts to.
Alerts Interval Time: Specify the interval between e-
between 0 and 60 minutes. Any event trigger during the interval perio
This option is useful for the events with
[Need authentication to login] If the SMTP Server needs authentica
option and type the valid usernam
[This server requires a secure connection] If the SMTP Servers ne
connection (SSL), select this o
[Alarm Settings] You can choose to automatically send e-mail alerts under
conditions: video lost, tampering alarm, disk w
motion detection and triggered input.
For the alarm condition Motion Detection and Digital Input triggered, a still image from
the specified camera will be sent with the e-mail alert.
Note:
1. For GV-VS12, the This server requires a secure connection option is only
available on Firmware Version 1.02 or later.
2. The motion detection and triggered input options (under the Alar
section) are available for GV-
GV-VS12 (Firmware Version 1.04 or later), GV-VS14 and GV-VS2420 / 2400.
For the related settings to send e-mail alerts, see 4.1.3 Motion Detection, 4.2.2
Input/Output Settings and 4.4 Monitoring.
64
ber. Or keep the default value 25.
high occurrence.
e and password.
ption.
rite error (Rec Error), hard disk full (HD full),
VS04H (Firmware Version 1.03 or later), GV-VS11,
mail alerts. The interval can be
d will be ignored.
tion, select this
eds a secure
these
m Settings