Administrator Mode
4
4.3.6 Backup Center
Note the function is only available for GV-VS04H (Firmware Version 1.
03 or later), GV-
VS11 / 12
(Firmware Version 1.02 or later) and GV-VS14 / 2420 / 2400 / 2401 / 2820 /
2800 / 21600.
The connection to GV-Backup Center allows you to back up another copy
of recordings
and system log to a PC-based GV-Backup Center
while the GV-Video Server is saving
these data to the attached storage device. If data are lost at where the GV-Video Server is
located, the recording data remain safe in a different location.
Figure 4-28
To enable the GV-Backup Center connection:
1. Activate Link: Enable the connection to GV-Backup Center.
2. Host Name or IP Address: Type the host name or IP address of GV-Backup Center.
87