09/Front Wheel; Removing Front Wheel; Installing The Front Wheel - KTM 50 SX Repair Manual

09/FRONT WHEEL

Removing front wheel

11.1

Installing the front wheel

11.2
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
–
Jack up the motorcycle. (
–
Remove nut
700502-01
–
Hold the front wheel and pull out the wheel spindle
front wheel out of the fork.
Info
Do not pull the hand brake lever when the front wheel is removed.
Always lay the wheel down in such a way that the brake disc is not dam-
aged.
700503-01
–
Clean and grease wheel spindle
Long-life grease (
–
Lift the front wheel into the fork, position it, and insert wheel spindle
washer .

700503-10
–
Position washer
–
Mount and tighten nut
Guideline
Front wheel spindle nut
–
Remove the motorcycle from the work stand. (
–
Operate the hand brake lever several times until the brake linings are lying correctly
on the brake disc.
700502-10
p. 7)
with washer.

.

p. 144)
.

.

with the washer
 

M12x1 40 Nm
(29.5 lbf ft)
p. 7)
46
. Take the
with