10/REAR WHEEL
Adjusting chain tension - after checking
12.9
Adjusting chain tension - installing rear wheel
12.10
Adjusting the chain guide
12.11
Info
The size of the chain wheel varies with the number of teeth. The chain guide can be adjusted on small sprockets.
–
Loosen nut
–
Adjust the chain tension by turning the adjusting screws
Guideline
Chain tension
Turn adjusting screws
is aligned with the front wheel.
–
Make sure that the chain adjuster supports
screws
.
700484-11
–
Tighten nut
Guideline
Nut, rear wheel spindle
–
Remove the motorcycle from the work stand. (
–
Loosen nut
–
Adjust the chain tension by turning the adjusting screws
Guideline
Chain tension
Turn adjusting screws
is aligned with the front wheel.
–
Make sure that the chain adjuster supports
screws
.
700484-10
–
Tighten nut
Guideline
Nut, rear wheel spindle
–
Adjust the chain tension by turning the adjusting screws
Guideline
Chain tension
Turn adjusting screws
is aligned with the front wheel.
700484-12
–
Loosen screw
–
Position the chain guide.
–
Tighten screw.
Guideline
Remaining screws, chassis
700485-01
.
equally on the left and right. Check that the rear wheel
.
.
equally on the left and right. Check that the rear wheel
.
equally on the left and right. Check that the rear wheel
.
left and right.
5... 8 mm (0.2... 0.31 in)
are fitted correctly on the adjusting
M12x1
40 Nm
(29.5 lbf ft)
p. 7)
left and right.
5... 8 mm (0.2... 0.31 in)
are fitted correctly on the adjusting
M12x1
40 Nm
(29.5 lbf ft)
left and right.
5... 8 mm (0.2... 0.31 in)
M6
10 Nm (7.4 lbf ft)
52