Installing The Main Silencer; Removing The Glass Fiber Yarn Filling Of The Main Silencer - KTM 50 SX Repair Manual
Hide thumbs
Also See for 50 SX:
- Owner's manual (91 pages) ,
- Setup instructions (19 pages) ,
- Owner's handbook manual (26 pages)
Table of Contents
Advertisement
05/EXHAUST
Installing the main silencer
7.4
Removing the glass fiber yarn filling of the main silencer
7.5
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down. Do not touch hot components.
–
Remove screw
–
Remove screw
700512-01
–
Pull the main silencer off of the manifold at the rubber sleeve
700513-10
–
Position the main silencer.
–
Mount the main silencer with the rubber sleeve
–
Mount the silentblock with the screw
Guideline
Remaining screws, chassis
700513-01
–
Position the collar sleeves.
–
Mount and tighten screw
Guideline
Remaining screws, chassis
700512-10
–
Remove the main silencer. (
–
Remove screws
–
Pull the glass fiber yarn filling
–
Clean the parts that are to be reinstalled.
700514-01
.
.
.
M6
.
M6
p. 38)
of locking cap
. Remove locking cap and outer tube
from the inner tube.
.
.
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
.
39
Advertisement
Table of Contents
