01/FORK, TRIPLE CLAMP
Installing the fork legs
4.3
Servicing fork
4.4
–
Position the fork legs.
–
Adjust fork overhang
Guideline
Upper fork projection
300734-10
–
Tighten screw
Guideline
Screw, top triple clamp
–
Tighten screws
Guideline
Screw, bottom triple clamp
300733-11
–
Position the brake caliper, fit and tighten the screws
Guideline
Screw, front brake caliper
300732-11
–
Position the brake line. Put the clamp on, and mount and tighten screws
–
Install the start number plate. (
–
Install the front wheel. (
300731-11
Condition
The fork legs have been removed.
.
10... 17 mm (0.39... 0.67 in)
.
M8
.
M6
M8
p. 44)
p. 46)
25 Nm
(18.4 lbf ft)
10 Nm (7.4 lbf ft)
with washers.
20 Nm
Loctite
®
243™
(14.8 lbf ft)
.
10