04/SHOCK ABSORBER, SWINGARM
Disassembling the piston rod
6.13
–
Push in seal ring retainer
Info
Do not scratch the inside surface.
300433-10
–
Remove the piston rod. Drain the remaining oil.
300434-10
–
Disassemble the damper. (
–
Clamp the piston rod with the heim joint into a vise.
–
Remove nut
300435-10
–
Remove supporting plate
Info
Thread the rebound shim stack onto a screwdriver and set the shims down
together.
300436-10
–
Remove compression shim stack
Info
Thread the compression shim stack onto a screwdriver and set the shims
down together.
300437-10
–
Remove supporting plate
–
Remove seal ring retainer
300439-10
. Remove lock ring
p. 26)
.
and rebound shim stack
.
.
.
.
together with piston
27
.