Checking Clutch Engagement Speed; Adjust The Clutch Engagement Speed - KTM 50 SX Repair Manual

32/CLUTCH

Checking clutch engagement speed

19.3

Adjust the clutch engagement speed

19.4
–
Position the clutch drum.
–
Hold the clutch drum with the special tool
–
Mount and tighten screw
Guideline
Screw, clutch drum
300656-11
–
Position the clutch cover with the gasket.
–
Mount and tighten screws
Guideline
Screw, clutch cover
300655-11
–
Position the foot brake lever.
–
Mount and tighten nut
Guideline
Remaining nuts, chassis
–
Mount the spring
–
Check the gear oil level. (
–
Check the clutch engagement speed. (
300654-11
–
Connect special tool
Tachometer (45129075000) (
Danger
Danger of poisoning Exhaust gases are poisonous and inhaling them may
result in unconsciousness and/or death.
–
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
300658-10
–
Start the motorcycle.
–
Slowly increase engine speed until the clutch begins to engage.
–
Measure the engine speed.
Clutch engagement speed
» If the specified value is not reached:
–
Adjust the clutch engagement speed. (
–
Check the clutch engagement speed. (
–
Remove the centrifugal force clutch. (
–
Dismantle the centrifugal clutch. (
.

.

M8
.

M6
.

M8
.

p. 118)
p. 112)
.

p. 146)
7,200... 7,500 rpm
p. 112)
p. 111)
p. 80)
30 Nm Loctite ® 243™
(22.1 lbf ft)
10 Nm (7.4 lbf ft)
30 Nm
(22.1 lbf ft)
p. 112)
112