13/BRAKE SYSTEM
–
Remove screws
–
Take off cover
–
Press the brake piston back to its basic position and make sure that no brake fluid
overflows from the brake fluid reservoir.
–
Install the rear brake linings. (
201175-10
–
Add brake fluid to level
Guideline
Dimension
top edge of container)
Brake fluid DOT 4 / DOT 5.1 (
–
Position the membrane and the cover with the washer. Mount and tighten the
screws.
201170-10
Info
Clean up overflowed or spilt brake fluid immediately with water.
.
with washer
and membrane
p. 62)
.
(brake fluid level below
p. 142)
.
10 mm (0.39 in)
63