30/ENGINE - WORK ON INDIVIDUAL PARTS
Installing the water pump
16.6
Changing the shaft seal ring of the kick starter
16.7
–
Remove shaft seal ring
–
Press out the bearing of the water pump shaft with a suitable tool.
Info
Support the clutch cover when pressing out.
300509-10
–
Press the bearing of the water pump shaft all the way in with a suitable tool.
Info
Support the clutch cover when pressing in.
–
Press in the shaft seal ring
300509-11
–
Mount water pump shaft
Info
Do not damage the shaft seal ring.
–
Mount the water pump impeller.
–
Mount and tighten screw
Guideline
Screw, water pump wheel
300508-11
–
Mount drive gear
300507-11
–
Remove shaft seal ring
–
Press the new shaft seal ring all the way in with the open side facing inward.
Info
Support the clutch cover when pressing in.
300510-10
.
until it is flush.
.
.
M5
.
of the kick starter.
Loctite
243™
5 Nm
®
(3.7 lbf ft)
79