TRENDnet User's Guide
4. Interference from devices that produce RF (radio frequency) noise can also
impact your signal. Position your wireless devices away from anything that
generates RF noise, such as microwaves, radios and baby monitors.
If possible, upgrade wireless network interfaces (such as wireless cards in computers)
from older wireless standards to 802.11n or 802.11ac. If a wirelessly networked device
uses an older standard, the performance of the entire wireless network may be slower.
If you are still experiencing low or no signal consider repositioning the wireless devices,
installing additional access points or wireless extenders.
© Copyright 2016 TRENDnet. All Rights Reserved.
PLC Settings
Setup > PLC Setting
These settings allow you to pair or not with other powerline devices in the same
powerline network.
LAN Settings
Setup > LAN Setting
The device comes with default IP of 192.168.10.30. When connected to a network, the
DHCP client mode will turn on.
TPL‐410AP / TPL‐410APK
13