Do Setup - Thermo Scientific Star Series User Manual

Dissolved Oxygen Technique
DO Setup Steps
1 . From the measurement mode, press
2 . Press /
top line .
3 . Press to confirm the setting and move the arrow icon to the middle line .
4 . Press /
+ % Sat = % Saturation Resolution
a .
+ mg/L
b .
c . = Barometer Type (Auto/Manual)
d . = Manual Pressure Compensation
e . = Automatic/Manual Salinity Compensation
f . = Manual Salinity Correction
g . = Calibration Type
5 . Press to select the option and move the arrow icon to the bottom line .
6 . Press /
you will see on the display and the range of values which may be entered .
7 . After entering a value, press
move the arrow icon to the top line . Repeat steps 3 through 6 for all options .
8 . Press to return to measurement mode .
EN-30
to scroll through the setup menu until
to scroll through:
= Concentration Resolution
and to enter the value . The previous table identifies what
.
to complete programming of that option and
Thermo Scientific Orion Star
is displayed on the
Series Meter
™