Thermo Scientific Star Series User Manual page 48

ISE Technique
4 . Press /
•
•
• M
• mG/L = mg/L
• PEr
• PPb = Parts per billion
• nOnE = No units
•
• HIgH - for most measurements
• LOw - for low level measurements that need more stabilization time
•
• OFF
• AUtO
5 . Press to accept the selection and move the arrow icon to the bottom line .
6 . Press /
7 . Press to accept the selection and return the arrow icon to the top line .
8 . Repeat steps 3 through 7 to edit ISE settings as needed .
9 Press to return to measurement mode .
EN-42
to scroll through the following options:
= Resolution
= ISE Measurement units
= Molar
= Percent
= ISE calibration range
= Non-linear Blank Correction
and to edit the selected value .
Thermo Scientific Orion Star Series Meter
™