Thermo Scientific Star Series User Manual page 42

Conductivity Technique
4 . Press /
• = Temperature Compensation Selection . The users may elect to turn
• = Temperature coefficient for
• = TDS Factor for Total Dissolved Solids measurement
• = Conductivity Cell Constant (nominal cell constant used for
• = Reference temperature for temperature compensation . Options
• = Conductivity cell type (Planar or Conventional)
5 . Press to accept the selection and move the arrow icon to the bottom line .
6 . Press /
7 . Press to accept the selection and move the arrow to the top line .
8 . Repeat steps 3-7 to edit conductivity settings as needed .
9 . Press to return to measurement mode .
EN-36
to scroll through the following conductivity settings:
temperature compensation
compensation, or a non-linear
natural and ultra-pure water .
expressed in % /C .
Auto-Calibration)
are degrees C,
and to edit value .
, select linear
temperature compensation for
(linear) temp compensation
degrees C, or
Thermo Scientific Orion Star
temperature
degrees C .
Series Meter
™