Selecting Measurement Mode - Thermo Scientific Star Series User Manual

Menu Setup

Selecting Measurement Mode

In the measurement mode the arrow icon on the left side of the display screen
indicates which mode is selected . Use
modes associated with a selected line . Use
line, and then toggle
selected line .
pH
mV
Rel mV
ISE
Off
μS/cm or mS/cm for conductivity
mg/L for TDS
ppt for Salinity
MΩ-cm for resistivity
Off
%Sat for DO percent saturation
mg/L for DO concentration
Barometric Pressure
Off
For setup information related to specific techniques, refer to Chapter VI through
Chapter IX of this manual .
EN-22
/ to scroll through the modes associated with the
/ to scroll through the various
to move the arrow icon to the next
Thermo Scientific Orion Star Series Meter
™