Igmp Snooping Multicast Vlan Settings - D-Link xStack DES-3200 Series Reference Manual

Click the Delete button to remove the corresponding entry.
After clicking the Group List
The fields that can be configured are described below:
Parameter
Multicast Address List
Click the Add button to add a new entry based on the information entered.
Click the <<Back button to discard the changes made and return to the previous page.
Click the Delete button to remove the corresponding entry.

IGMP Snooping Multicast VLAN Settings

On this page the user can configure the IGMP snooping multicast VLAN parameters.
To view the following window, click L2 Features > L2 Multicast Control > Multicast VLAN > IGMP Snooping
Multicast Group VLAN Settings, as show below:
The fields that can be configured are described below:
Parameter
IGMP Multicast VLAN
State
IGMP Multicast VLAN
Forward Unmatched
VLAN Name
VID (2-4094)
Remap Priority
Replace Priority
xStack® DES-3200 Series Layer 2 Managed Fast Ethernet Switch
link, the following page will appear:
Figure 4-60 Multicast Group Profile Multicast Address Settings window
Description
Enter the multicast address list value.
Figure 4-61 IGMP Snooping Multicast VLAN Settings window
Description
Click the radio buttons to enable or disable the IGMP Multicast VLAN state.
Click the radio buttons to enable or disable the IGMP Multicast VLAN Forwarding
Unmatched state.
Enter the VLAN Name used.
Enter the VID used.
0-7 – The remap priority value (0 to 7) to be associated with the data traffic to be
forwarded on the multicast VLAN.
None – If this is specified, the packet's original priority is used. The default setting
is None.
Specify that the packet's priority will be changed by the switch, based on the remap
priority. This flag will only take effect when the remap priority is set.
99