L2 Features > L2 Multicast Control > Mld Snooping > Mld Snooping Mrouter Settings - D-Link DMS-1100-10TS User Manual

Figure 4.96 – L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Group Settings
The fields that can be configured for MLD Snooping Group Settings are displayed below:
Item
VID (1-4094)
Group Address
From Port / To Port
Click Apply to make the configurations take effect.
Click the Delete button to remove the specified entry.
Click the Find button to locate a specific entry based on the information entered.
Click the Find All button to view all the entries.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
The fields that can be configured for the MLD Snooping Groups Table are described below:
Item
VID (1-4094)
Group Address
From Port / To Port
Click the Find Snooping button to locate a specific entry based on the information entered.
Click the Find All Snooping button to view all the entries.
L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Mrouter Settings
The MLD Snooping Mrouter Settings page allows user to configure the interfaces as router ports or ports that
cannot be multicast router ports on the Switch.
Description
Enter the VLAN ID.
Enter the IP multicast group address.
Select the range of ports to be configured.
Table 4.67
Description
Enter the VLAN ID.
Enter the IP multicast group address.
Select the range of ports to be configured.
Table 4.68
76
D-Link DMS-1100 Series User Manual