Log - D-Link DSL-2640U User Manual

DSL-2640U Wireless ADSL2+ Router with Ethernet WAN Support
User Manual

Log

On the System / Log page, you can set the system log options and configure sending the system
log to a remote host.
To enable logging of the system events, go to the Settings tab and move the Enable switch to the
right. Then specify the needed parameters.
Parameter
Logging type
Level
Server
Port
After specifying the needed parameters, click the APPLY button.
Figure 119. The System / Log page. The Settings tab.
Select a type of logging from the drop-down list.
Local: the system log is stored in the router's memory. When
•
this value is selected, the Server and Port fields are not
displayed.
Remote: the system log is sent to the remote host specified in
•
the Server field.
Local and remote: the system log is stored in the router's
•
memory and sent to the remote host specified in the Server
field.
Select a type of messages and alerts/notifications to be logged.
The IP or URL address of the host from the local or global network,
to which the system log will be sent.
A port of the host specified in the Server field. By default, the value
514 is specified.
Page 158 of 174
Configuring via Web-based Interface
Description