Technical Specifications; Important Information - Seat TOLEDO Owner's Manual

Technical specifications

Technical specifications

Important information

Important
The information in the vehicle documentation
always takes precedence over the informa-
tion in this Instruction Manual.
All technical specifications provided in this
documentation are valid for the standard
model in Spain. The vehicle data card inclu-
ded in the Maintenance Programme or the
vehicle registration documents shows which
engine is installed in the vehicle.
The figures may be different depending
whether additional equipment is fitted, for
different models, for special vehicles and for
other countries.
Abbreviations used in the Technical Specifi-
cations section
Abbrevi- Meaning
ation
kW Kilowatt, engine power measurement.
Pferdestärke (horsepower), formerly used
PS
to denote engine power.
218
Technical specifications
Abbrevi- Meaning
ation
rpm Revolutions per minute - engine speed.
Nm Newton metres, unit of engine torque.
litres per Fuel consumption in litres per 100 km (70
100 km miles).
Carbon dioxide emissions in grams per km
g/km
(mile) travelled.
CO Carbon dioxide
2
Cetane number, indication of the diesel
CN
combustion power.
Research octane number, indication of the
RON
knock resistance of petrol.
Identification data contained on the
data sticker
Fig. 214 Data sticker.
Identification plate
Fig. 215
Vehicle data sticker
›››
Fig. 214
The vehicle data sticker
on the boot floor and is also attached to the
Maintenance Programme.
The following information is provided on the
vehicle data sticker:
Vehicle identification number (VIN)
1
Vehicle model
2
Identifying letters of the gearbox/number
3
of the original paint finish/Interior equip-
ment number/engine power/engine
identifying letter
Partial description of the vehicle
4
Weight in running order
5
Fuel consumption (in litres per 100 km) –
6
urban/on the motorway/combined
Combined CO emissions (g/km)
7
2
is located