Technical Specifications; Technical Features; Important Information - Seat Mii Owner's Manual

Technical specifications

Technical features

Important information

Introduction
The information in the vehicle documentation
always takes precedence over the informa-
tion in this Instruction Manual.
All technical specifications provided in this
documentation are valid for the standard
model in Spain. The vehicle data card inclu-
ded in the Maintenance Programme or the
vehicle registration documents shows which
engine is installed in the vehicle.
The figures may be different depending
whether additional equipment is fitted, for
different models, for special vehicles and for
other countries.
210
Technical specifications
Abbreviations used in the Technical Specifi-
cations section
Ab- Meaning
brevia-
tion
kW Kilowatt, engine power measurement.
Pferdestärke (horsepower), formerly used to
PS
denote engine power.
rpm Revolutions per minute - engine speed.
Nm Newton metres, unit of engine torque.
l/100 Fuel consumption in litres per 100 km (70
km miles).
Carbon dioxide emissions in grams per km
g/km
(mile) travelled.
CO Carbon dioxide
2
Cetane number, indication of the diesel com-
CN
bustion power.
Research octane number, indication of the
RON
knock resistance of petrol.
Vehicle identification data
Vehicle data label.
Fig. 176
Vehicle identification number.
Fig. 177
Vehicle identification number
The vehicle identification number (chassis
number) can be read from outside the vehicle
through a viewer in the windscreen
›››
Fig. 177. This viewer is located in the lower