WARNING
●
Before driving with the ball-headed bar fit-
ted, verify its correct assembly and place-
ment in the clamping bush.
●
Do not use the ball-headed bar if it is not
correctly placed and fixed in the clamping
bush.
●
Do not use the towing device for towing if it
is damaged or has missing parts.
Do not modify or adapt the towing device
●
connection.
Never disengage the ball-headed bar with
●
the trailer still hitched.
CAUTION
Be careful not to damage the paint on the
bumper when handling the ball-headed bar.
188
Operation
Description
Towing bracket device support for
Fig. 193
hitching/ball-headed bar.
The ball-headed bar is detachable. It is loca-
ted in the spare wheel compartment or in the
spare wheel compartment in the boot
›››
page 79, Vehicle tool
kit*.
›››
Fig. 193
Key to
13-pin socket
1
Safety flange
2
Clamping bush
3
Clamping bush cap
4
Ball head cover
5
Ball-headed bar
6
Locking balls
7
Centred
8
Red marking on the manual regulator
9
Manual regulator
10
Key
11
Key slot cover
12
Red marking on the manual regulator
13
White marking on the ball-headed bar
14
Note
Contact an Authorised Service Partner if you
lose your key.